Viega 33265 – 3/4" x 20 ft PEX Ultra Coil for Potable Water Systems
The Viega 33265 PEX Ultra Coil is a 3/4-inch nominal size cross-linked polyethylene tubing designed for potable water distribution. With a 20-foot coil length, this tubing is suitable for short-run installations in residential and light commercial applications where flexibility, corrosion resistance, and thermal durability are critical.
Manufactured to meet ASTM F876 and F877 standards, this tubing is rated for 160 psi at 73°F, 100 psi at 180°F, and 80 psi at 200°F, making it compatible with both cold and hot water systems. Its physical properties allow for secure connections using crimp, clamp, press, or push-to-connect fittings.
Specifications
Nominal Size: 3/4 in
Outside Diameter: 0.875 in
Inside Diameter: ~0.681 in (Type A/B variant dependent)
Wall Thickness: ~0.097 in
Length: 20 ft coil
Material: PEX (cross-linked polyethylene)
Temperature Ratings: Up to 200°F
Pressure Ratings: 160 psi @ 73°F; 100 psi @ 180°F; 80 psi @ 200°F
Certifications: ASTM F876/F877, NSF 61, NSF 14, CSA B137.5
Application: Potable water systems (hot/cold), residential and commercial
Country of Origin: USA
Features
Chlorine and corrosion resistant for long service life
Flexible coil allows for reduced fittings in layout design
Compatible with crimp, clamp, and push-to-connect systems
Marked with incremental footage and standard compliance
UV-resistant (limited exposure rating)
Installation Notes
PEX Ultra tubing should be installed using manufacturer-approved fittings and tools. Expansion, crimp, and clamp systems are all suitable depending on the project requirements. Support intervals must follow standard PEX installation guidelines (e.g., 32" horizontal, 4'-6' vertical with standard supports). Ensure tubing is not kinked or overstressed during layout.
Use Cases
Hot and cold potable water lines
Residential and light commercial new builds and remodels
Stub-outs, fixture supply lines, and short branch runs
Suitable for installation in walls, slabs, and crawlspaces